-  Golf Clubfitting, Sales and Repairs

Golf Club Components 
Golftek for all your Wishon Club Fitting, Putters, Drivers, Fairways, Grips and Golf RepairsWishon LOgo
Golftek is a Full Member of The International Clubmakers Guild for all your Club Fitting, Putters, Drivers, Fairways, Grips and Golf RepairsGolftek for all your Orka Club Fitting, Putters, Drivers, Fairways, Grips and Golf Repairs
Fairway Heads

Orka Reflex Fairway Head
The REFLEX fairway, with RC Technology, is a revolution for our fairways range.

Featuring the REFLEX compression channel, ball speeds across the entire face are maximised, even on off center hits. Available in 3 and 5 woods you can get the club that suits your ball flight.

The REFLEX fairway also features a single sole weight in the mid position to offer a ball flight slightly lower than that of the GS5 PVD fairway by moving the CG slightly further forward.

Sound and feel are as good as the looks and matched by the performance.
Price: 99,00 €
Orka GS5 Fairway Head
The GS5 PVD fairway range is available in 15,17 and 19 degree true lofts.

These fairway wood heads are classically shaped with the same fluid dynamics sole plate seen in the GS5 Driver, engineered to offer less drag and allow for quicker swing speeds.

Key to maximising the performance of the GS5 is going through the fitting process to match the correct shaft to our swing to optimise performance. Made from 17-4 stainless steel with a spring steel face, this fairway head maximises distance, forgiveness and performance, perfect off the fairway or off the tee for more control.

Internal weight pockets allow for a high Moment Of Inertia head, with optimal spin rates to offer you maximum control over your shots. The DFD (Dynamic Face Design) allows for greater forgiveness from off centre hits without dramatic loss of distance or accuracy.

This is modern engineering performance inside the shell of a classic looking fairway wood.
Price: 73,00 €
Wishon Fairway Driver
The 919F/D Fairway Drivers are the answer for players looking for
a high COR “mini-driver” or for a tee shot club for use on tight par-4 and par-5 holes for greater control without losing any distance normally achieved with a conventional high COR titanium driver.
Designed for the golfer who needs more control off the tee or wishes a much smaller size driver head.
Thin, variable thickness, high strength steel face for high 0.830 COR for maximum distance.
Can also be played off the fairway by more skilled players who want every bit of second shot distance on long holes.
Available in RH in 11* and 14* lofts, cosmetically designed to complement the appearance of the 919THI Drivers.
Price: 118,00 €
Wishon 929HS Fairway
304 Stainless Steel Hosel is separately welded to the body to enable ease in bending for a wide range of custom lie and face angle bending (+/-4*).
31mm Shallow Face Height is ideal for golfers who play off firm, short grass fairways orfor golfers who need more confidence getting the ball well up to fly.
HS 350 High Strength Steel Thin Face allows for a high COR for increased ball speed and superb off center hit performance.
Reduced Face-to-Back Sole Width reduces the sole to ground contact for more consistent contact with the ball, even from the rough.
Available in RH in #2 (12°), #3 (14°), #4 (16.5°), #5 (18°), #7 (21.5°) and #9 (24.5°) in Left hand #3 (15°), #5 (18.5°) and #7 (21°)
Price: 112,00 €
Loft / Hand:
Wishon 950HC Fairway
The new 950HC is the second generation version of the 949MC with a traditional shape and size with 34mm face height and bendable hosel to offer custom lie and face angle fitting options to fit all golfers.
New semi-cup face construction to ensure maximum COR and offer a better level of off-center forgiveness in a fairway wood design.
Twin weight bores for a wide range in length, shaft weight, swingweight fitting options.
Available in RH in #3 (14.5), #4 (16.5*), #5 (18*), #7 (21*) and 9 wood (24.5*) to expand the fitting options for players. Gloss metallic black with satin chrome face, sole and hosel.
Price: 112,00 €
Loft - RH Only:
Wishon 365PF Fairway
The most versatile fairway wood design created. Head size and shape progresses gradually from traditional fairway wood in the #3 and 4 to slightly smaller fairway profile for the #5, to a slightly more narrow fairway to semi-broad hybrid in the #7 and 9.
Twin weight bores allows assembly from traditional fairways
to hybrid lengths as desired for the golfer.
The highest smash factor found in a conventional investment cast steel head, achieved through TWGT’s metallurgical experience and knowledge. 365PF offers the best combination of performance and value in a woodhead design.
Bendable hosel allows a range of +/-2º in the lie and the face angle. Hand Select for loft offers +/-1* options for each head model from its designed loft spec.
Available in RH in #3(15), #4(16.5), #5(18), #7(21) and #9(24.5).
Price: 54,00 €
Loft / RH Only: